Description
The compatible SATA PCB number for WD 2060-810082 USB PCB is WD2060-810081 and the product you are ordering is WD 2060-810081 SATA PCB here.
After users buy this unlock PCB, users will get one helpful technique support document on how to recover lost data from these WD MCU locked hard drives.
Become the first data recovery companies to fix these hard drives and get lost data back for your clients with this data recovery unlock PCB!
With the PCB number 2060-810082, the hard drive is fully locked and users cannot do anything to repair the firmware failure. If users want to repair the firmware, users must get this data recovery unlock PCB to unlock the HDD and then users can read and write rom and firmware modules.
HDDs using PCB 2060-810082:
WD20JDRW-11C7VS0, 810082-000
WD20JDRW-11C7VS1, 810082-000
HDD Family: FBLite2
Please note: This firmware unlock PCB doesn’t help on the WD SMR HDD SED V2 data encryption issue, it helps only to access firmware area. To fix the SED V2 data encryption issue, users need to transfer the main chip from the data drive to the firmware unlock PCB or users need to use the original PCB after firmware repair with the firmware unlock PCB.
In many data recovery cases, the module 190 backup failed by USB-SATA adapter or USB-SATA wiring but the 190 backup is successful by firmware unlock SATA PCB and therefore firmware unlock PCBs are necessary for these cases.
WD PCB 810082 HDD Firmware Repair Tool: DFL WD HDD Firmware Repair Tool
Users can repair WD HDD firmware module damage, reset smart, remove password, edit HDD ID, etc.
WD PCB 810082 HDD Data Recovery Tool: DFL DDP Data Recovery Equipment
Users can repair module 190, auto load T2data, image WD HDDs with weak heads, bad sectors, common firmware failures, can extract lost partitions, folders, files, etc;
WD PCB 810082 SMR HDD Head Replacement Tool
WD 810082 USB-SATA Adapter Smart
G3 WD SMR HDD 810082 USB-SATA Data Recovery Adapter Pro.
Chip-on HDD Flash Programmer Smart/HDD ROM Chip Pin Reader
Users don’t need to solder ROM chips off and read rom chip directly, super easy for WD SMR HDD ROM read and write
