CREATE ACCOUNT

FORGOT YOUR DETAILS?

This is one Hitachi HDT725040VLAT80 Hard Drive Head Swap case study and the following are detailed steps to install/uninstall the heads from this drive. Please note: To open hard drive requires professional clean room environment and head swap tools. Within this case, users can use either the level 1 or level 2 head comb suite.

This is one detailed document explaining how to swap heads on one Seagate 5400.6 hard drive. HDD ID: Seagate 5400.6 500GB with 2 platters and 4 heads. Head Comb No.302 has been used on this drive. Steps: 1, Remove the hard drive cover; 2, Remove the top magnet over the voice coil actuator; 3, Remove

The following tips come from the users of level head comb suite: Head Comb #302: works with Toshiba MK2035GSS – 200GB – 4Heads/2 Platters Head Comb #302: can also work on ST9160821AS – 160GB – 4 Heads/2 Platters, but you can’t insert the pin. Head Comb # 104 : works with wd1600js – 88mhb0 4Heads/2

Does a clicking hard drive means a hard drive has head damaged? Hard drive clicking is one typical and common symptom for one drive with head damage but hard drive clicking can be caused by multiple reasons. 1, Physical damage: head damage, platter scratches, heads stiction, dirty heads, etc; For these kinds of physical damage,

Many clients have recently asked one question about the selection of hard drive plastic head comb or hard drive metal head comb. Some people told me they prefer plastic ones, because it’s not easy to scrach the platters, some people prefers metal head comb and they say metal head comb is not easy to be

Why Does A Hard Drive Head Swap Fail

Tuesday, 30 December 2014 by

Hard drive head swap is one very important step to fix physical data recovery case. For many physical data recovery cases, they are usually coming with clicking noises or other kind of mechanical noises. Some drives are even dead as common clients see while they are actually not. To handle on such kind of dead

We are sorry for causing any inconvenience to clients who have been waiting for our Seagate metal head comb for 7200.11 and 7200.12 slim hard drives. Due to the cost-effective and high-precision design for 1-8 heads, this metal head comb is in great demand and users can now buy the head comb again. The Seagate

When users are going to open hard drives and perform head swap or platter swap, users need to have follow some rules and have some professional physical swap toolkit. Firstly, users need to have clean room environment and the tool required is at least one clean bench, one Vertical Laminar Flow Station is suggested. Users

When users are going to offer physical data recovery services, users need to have good hands-on experience, qualified head and platter swap tools and clean room environment (for beginners, one qualified clean bench is good for opening hard drives for heads installation and uninstallation.) It’s suggested users need to practice on 50-70 useless hard drives

TOP