New WD Charger HDD Head Replacement Tool for 2 platter is added to Western Digital HDD Head Comb Suite; New WD Charger HDD Head Replacement Tool for 2 platter is added to Level 2 Head Comb Suite.Standard; New WD Charger HDD Head Replacement Tool for 2 platter is added .
It is possible to get the WD20SPZX, WD20SDRW, WD20SMZW, WD20SDZW Head Replacement Tool For Free if users do one of the following: 1, Buy Dolphin CCTV DVR Recovery Pro. Business version, users will get the WD20SPZX, WD20SDRW, WD20SMZW, WD20SDZW Head Replacement Tool For Free;2, Buy Head and Platter Swap .
Hello to all friends and clients, The China Sping Festival is coming and HDD HEAD Tools factory and the international shipping companies will enter holiday during Feb.10-17, 2021 and the shipping is not possible during this time. All orders during this holiday will be arranged on Feb.18 2021 and .
For new Western Digital Spyglass hard drives with PCB number of 800041 or 810012, users need not only the compatible SATA PCB of 800022 , users need also the HDD USB-SATA wiring PCB for data encryption purpose; For new Western Digital Palmer and Charger hard drives with PCB number .
Here are the steps to remove the heads properly from one 2.5″ laptop HTS541060G9SA00 hard drives. Step 1: Remove the hidden head screw behind the label and screws on the lid edge;Step 2: Remove the HDD lid, hold the HDD with the lid at lower side, use some slim .
The new motor balance adjustment video is one new method our clean room engineer found and it is free for all clients who have purchased the Premium Video-How to Adjust HDD Motor Balance from hddheadtools.com。 Users can request this new motor balance adjustment video by email to [email protected] Motor .
The new photo instructions to use the Seagate 7200.11 And 7200.12 Head Replacement Tool are available. For all users who have purchased the Seagate 7200.11 And 7200.12 Head Replacement Tool, please email to [email protected] to request the new instructions and manual. Seagate 7200.11 And 7200.12 Head Replacement Tool is .
FAIL Servo Op=00DF Resp=0007 is very common terminal error message for Seagate physical damaged hard drives. If this error keeps coming like below and never enter F3 T>, it is definitely head damage. Boot 0x80MFAIL Servo Op=0100 Resp=0003 0100 0000 0000 0001 0000 0000 0000 0000 0000 0000 0000 .
PreampFaultStatus is one very com terminal error for Seagate hard drives. PreampFaultStatus:ROM not original, read ROM and check SN, Model and compare with labelPreamp chip damage, not commonChange ROM modules to fix and see